West Mountain Radio CBA V PRO 100V
High Voltage CBA V PRO West Mountain Radio 200W Computerised Battery Discharge Analyser with Software for batteries between 1.0V and 100.0V
The CBA V PRO 100V is a computerised battery analyser capable of scientifically and accurately analysing any type of battery from coin cells to automotive batteries up to 100 Volts
Calibrated and tested to accuracy levels of < 1% Amp load < 0.5% volts
Scientifically analyse battery performance
- True constant current battery capacity test with results graphically displayed, constant power testing supported with Extended software upgrade
- Discharge current is software and electronically regulated using a solid state switch and fan cooled electronic load
- Test any type of battery; coin cell to automotive or larger. Presets for NiCd, NiMH, Lead Acid, LiIon, LiPo, Alkaline, Carbon Zinc, Mercury etc.
- Solar cell profiling capability
- Lower current testing capabilities - down to 10 mA
- Multiple discharge tests can use Watts as a parameter (CBA II/CBA III only allows current)
Perform Fast, High Power Testing
- Tests quickly at real world load conditions, up to 150 watts or 40 amps maximum, whichever is higher.
- High voltage testing at up to 100 volts (CBA II and III only up to 48V);
- Perform power profile test (increase current at user's rate to see how voltage/power responds), useful for testing max power output of a power supply or solar cell
- Optional 500 watt and 1000 watt amplifiers.
Accuracy & Precision for demanding applications
- Remote voltage sensing for higher testing accuracy *
- On-board computer performs accurate measurement with 12 bit effective resolution. Auto ranging for 2 current ranges and three voltages.
- Each CBA is individually calibrated with a computerised calibration system.
- SDK for developing your own scripts or programming
- TTL UART port that can be controlled by an Arduino, Raspberry PI, or other embedded system with a TTL serial port
Built-in Safety Features Provide Superior Battery Protection
- Improved cooling system allowing higher continuous loads for testing *
- Additional LED status indications *
- Fail safe: automatic protection of temperature, current and power.
- Fuse Blown LED and easy the change fuses *
- Safety watchdog stops a discharge in the event of a computer crash.
- Discharge test current user selectable from 0 to 40 Amps
- Timed discharge test (stop discharge once certain Ah has been reached)
- Dynamic test (alter test current using panel on the side of the software, without having to stop and start a new test)
- Automatic voltage shut off at end of test using a software recommended or user selected safe discharge voltage
- Automatic over-temperature shut off at end of test at using a software recommended or user selected maximum temperature with optional external magnetic temperature sensor.
- User selected battery cell chemistry, number of cells and test current
Free Standard Software for Data Analysis
- User selected battery cell chemistry, number of cells and test current
- Software recommends safe tests based on user supplied battery information
- Automatic graph setup and scaling
- Measures and displays voltage, current, amp-hrs, watts
- User can set the criteria for "Easy-Go/No-Go" testing
- Easy overlay comparisons of multiple graphs may be displayed saved and recalled
- Save, display and print battery test graphs and battery labels
- Plug and Play high speed USB interface, with easy to use and intuitive Windows® software supplied on CD ROM
- Manage individual tests on any number of CBA V units connected to the same PC
- Software has no limit on number of CBA Vs that can be attached (CBA II/CBA III required multiple unit license)
Specifications:
One model for all testing ranges | |
Maximum cont. discharge rate: |
|
---|---|
Short Term Maximum Discharge |
|
Current Accuracy Typical |
|
Current Accuracy Maximum |
|
Voltage accuracy: |
|
Voltage range for battery under test: |
|
Sample rate: |
|
Residual current drain while battery is connected and not testing: |
|
PC Requirements Minimum: |
|
High performance micro controller with built in USB interface and 12 bit A/D conversion. | |
USB powered; the CBA does not use the battery being tested to run the CBA or the fan. | |
System ready and Test in progress LED indicators, viewable from across a room. | |
CBA internal over temperature sensing and protection. | |
Graph printing on any standard color or B&W printer. | |
Battery test label printing on standard 05160 stick-on labels. |
This package comes supplied with:
- CBA V PRO 100V unit
- 150mm Pigtail adaptor
- CBA Standard Software CD
- 1800mm USB Cable
- 40A Fuse
- Remote Sensing Cable
- Calibration Data
- User Manual
Related Products
Optional Accessories:
The CBA V PRO 100V comes with powerpole to powerpole connection only. For use with other types of connectors, we recommend using CC20PP-150 to convert connector type to Deans style T-Plug, thus making the CBA V PRO 100V now compatible with the following output plugs (each sold separately):
Selling Unit | EACH |
---|---|
Model No | CBA V PRO 100V |
Brand | |
Description | High Voltage CBA V PRO West Mountain Radio 200W Computerised Battery Discharge Analyser with Software for batteries between 1.0V and 100.0V |
Width | 72mm |
Height | 89mm |
Length / Breadth / Depth | 92mm |
Weight | 454g |
Categories |
Portable Power Product Battery Chargers / Analysers / Testers Battery Analysers and Testers West Mountain Radio Battery Analysers West Mountain Radio Battery Analysers |
Data Sheet |
Login to MI Link for pricing
Login for Pricing
MI Link is a dealer-only portal. If you are not a current MI account holder register for an account